Heavy Duty Tile Adhesives, For Long Lasting Bonds

One-stop shop for all your tile and stone fixing requirements & More!

Explore Solutions

Products that last

Diverse range of tile adhesives that are durable, strong & resistant to weather changes.

Explore

Safeguard your building.

Waterproofing Solutions to keep the Dampness away

More details

About

Cera Crete Industries

Cera Crete Industries is state of art manufacturing plant with all necessary infrastructure located in kundapur, Karnataka, India, is equipped with the latest machinery, production & technical team. We manufacture wide range of construction related products like tile and stone adhesives, grouts of various range, water proofing products, concrete admixture, tiles, stone, wall care products and accessories.

Modern design trends in residential and large scale construction projects lead to greater expectations in how tiles are used and bonded to substrates. To further add to this complexity, tiles are fabricated from a wide number of materials and in a variety of sizes.

cera crete

Our Products

cera crete

Mosaico Series

MOSAIC SERIES TILES

MOSAIC SERIES NATURAL STONES

MURALS BY TILES & STONES

MOSAIC CENTER PIECES

MOSAIC MAT DESIGNS

MOSAIC BORDERS

MOSAIC HIGH LIGHTERS

cera crete

Installation Instructions

Surface preparation

Proper surface preparation is essential for the correct installation of any floor covering. Surface must be structurally sound, smooth and dry. Glossy or painted surfaces must be sanded, stripped and cleaned of waxes, dust grease, loose material and any other contamination, which may interface with good bond.surface temperature should be maintained between 10°C to 38°C for good adhesion. Conrete bricks/blocks/wall to dry out by exposure to air for atleast 28 days.

Mixing

The standard mixing ratio is 4.5 to 5 liters for 20 Kg.put the clean water or recommend latex admixture in the mixing container first, then add ceracrete thin set adhesive.
For best result, mix with mixing paddle and 1%” heavy-duty drill.
To mix by hand, use a margin trowel and mix vigorously mix with hand or slow speed mixer until it’s obtain a homogeneous lump free paste.
Let the properly mixed adhesive to slake for 4-5 minutes.
Remix again for 2 minutes and apply with the recommended notched trowel.
Properly consistence mixed material will settle in the substrates in the form of strips(ridges) without slump when it is applied on substrates.

Application procedure

Use properly sized notched on trowel to ensure 100% coverage under a tile. Wet the substrate floor or wall slightly before applying the adhesive mixture. Apply thin bond coat of the mortar to the substrate with flat edge of the trowel approximately 3mm thickness. Comb the mixture with a notch edge of the trowel working in 1 direction at 45° angle.
If possible, spread in approximately 1 square meter at a time. Only apply as much adhesive mixture as can be covered with tile within a open time. Check open time by touching the adhesive bed with your finger tip because open time will vary depending on temperature and humidity.
Position tiles in the adhesive bed and press the tile firmly in a perpendicular motion across ridged moving back and forth because it allows maximum coverage. Back buttering advisable for some tile. Adjust tile promptly and beat in with a beating block and (wooden hammer) rubber mallet.
Periodically pull up tile and check back to ensure proper adhesive coverage. If material is dry or not sticky, recomb with notch trowel. If too dry ,remove and replace with fresh material.

Inquiries

Call or Whatsapp

Cera Crete Industriese

Our Services

Concrete Technology

Although concrete is second heaviest used entity in the world (water being the heaviest), it has some major deficiencies like low tensile strength, pervious, heterogeniety, brittle, prone to cracking & durability. These can be overcome by using our products supplemented with comprehensive range of technical services.

Adhesives

Use our structural/tiling adhesives for bonding of components to various substrates such as concrete, natural stones or hollow blocks, tiles thereby providing rigid bonding, structural strengthening and anchoring.

Grouts & Mortars

Grouting mortars are free-flowing, expanding, high-strength cement- or synthetic resin-based mortars, used for filling of voids under machines and other structural elements as well as for the grouting of anchors/base plates. We also provide ready to use cement mortars for various applications available in different packing.